UPS Status Monitor

$375.00$395.00 + GST

The Benbro UPS Status Indicator (UPSSI) has been specifically designed to provide remote indication of the UPS Status in a medical environment and is suitable for installation in Operating theatres, Intensive care, Recovery wards, Isolation rooms, nursing stations, Treatment rooms, and other Special care areas.

SKU: UPS Category:

Description

The unit is connected to the UPS electrical supply system and will indicate “Mains on” with a green LED indicator. The unit will indicate loss of supply to the UPS (“UPS in emergency mode”) with a synchronised, pulsating, audible alarm and a Visual flashing red LED alarm indicator, The UPSSI is equipped with an audio mute button (the Audible alarm will continue until muted). The visual alarm (and the audible alarm – if not muted) shall continue until the supply is restored to the UPS or the UPS is exhausted. The UPS Monitor is available in Stainless or Plastic plates, Horizontal or Vertical installation, and 240VAC or 12/24VDC monitoring.
Customised plates and labels available on request, conditions apply.

Additional information

Power Supply

100Vac-240Vac, 55mA/36mA Max, 47-63Hz (From UPS)

Fuse Rating

400mA 250V Slow Blow (F1). Fuse Must be replaced with one of the same rating.

Mains Indicator

Green LED indicates mains on

Alarm Indicator

Flashing Red LED indicates UPS in emergency mode

Audible Alarm

Pulsing buzzer indicates UPS in emergency mode

Mute Function

1hr-4hrs in 1hr increments

Alarm Input

Voltage free contact – normally closed open on alarm

Alarm Output Option*

Voltage free contact (normally open – closes on alarm)

Alarm Output Contact Rating

1A 24VDC / 0.5A 125Vac

Input Power Connector

Screw terminals suitable for 2.5mm2 wiring

Input Alarm Connector

Screw terminals suitable for 2.5mm2 wiring

Alarm Output Connector Option*

Screw terminals suitable for 2.5mm2 wiring

Operating Temperature Range

0-55°C

Dimensions

116mm x 75mm x 30mm (Standard Australian Electrical accessory plate format)

Input Voltage

12-24VDC, 240VAC

Construction

Stainless, Standard

Orientation

Horizontal, Verticle